Wolverine
Wolverine Airsoft Inferno HPA Engine Gen 2
- SKU:
- NFR-CA-012
- Availability:
- Usually Ships in 1-2 Weeks
Description
OVERVIEW
The GEN 2 Inferno is the culmination of a great deal of work to take the next step forward in the development of HPA technology. Over the past couple years since we launched the SMP, multiple other companies saw the value of this type of technology and have attempted to replicate its performance. The Gen2 once again leaves everyone far behind.
The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. Particularly, it is designed to solve the "open bolt problem". It is a hybrid design which keeps the advantages of an open bolt system: easy tuning, no first round dry fire, efficiency, etc... and adds the simplicity of easier hop up tuning that closed bolt systems have traditionally offered. In addition, it further improves the efficiency over our previous systems by an estimated 10-15%. Here are a few highlights!
FEATURES
- Patent Pending independent poppet and nozzle design
- Hybrid design allows pause between bb loading and bb firing
- Improves hop up performance with a wide range of stock and aftermarket options
- Still uses Wolverine Airsoft's Patent Pending Imbalanced Poppet
- Backwards compatible with all Wolverine Airsoft electronics.
- Still uses bullet proof direct solenoid fired design
- NO ADDITIONAL CRITICAL ORINGS--> No negative impact on reliability!
- Estimated 10-15% efficiency improvement
SPECS
- Input Pressure: 60-140PSI (Use with STORM Regulator for best performance!)
- Output Engergy: 1-3J Adjustable (build dependent)
- ROF: 5-35RPS Adjustable
- Battery Input: JST 6-9V
- Dwell: Fully Adjustable
- Electronics: Compatible with all Wolverine Airsoft Electronics
Can I upgrade my SMP/Inferno/HYDRA to a Gen 2 Inferno?
Yes! We will be offering upgrade kits which include the GEN2 Inferno body along with a filtered grip line. Simply swap the valve and electronics over from the original system and you are ready to rock!
But wait what about HYDRA?
We have some exciting development work underway for the HYDRA line of products, but until that project is ready to go we are going to be temporarily discontinuing HYDRA.
Does this mean you won’t support Gen1 Inferno/HYDRA?
We do our best to always support our products even if they are discontinued. Nothing to worry about.
So with the independent nozzle and poppet is the turning more complicated?
Not at all. Because the system still is operated by the single solenoid valve direct fired design, it features the same ultra simple tuning our SMP products are known for!
Does this mean I can just drop it in and go with no extra tuning to the hop up etc?
Yes! The system performs extremely well with most stock hop up configurations. The only think you will want to check is that your alignment is right. While the Gen2 is less sensitive to alignment than single moving part systems, it will still play a role in the overall performance of the gun.